Name:     ID: 
 
Email: 

11-3

Multiple Choice
Identify the choice that best completes the statement or answers the question.
 

 1. 

Tools that are of good quality are ____ than “bargain” tools.
a.
stronger
c.
more dependable
b.
lighter
d.
All of the above.
 

 2. 

A wrench that completely surrounds the bolt head or nut is called a(n) ____ wrench.
a.
adjustable
c.
box end
b.
open end
d.
pipe
 

 3. 

The ____ punch is used to make a small indentation in metal before drilling a hole.
a.
center
c.
pin
b.
drift
d.
aligning
 

 4. 

When using a hacksaw, you should apply light pressure ____.
a.
on the forward stroke
c.
on both forward and backward strokes
b.
on the backward stroke
d.
None of the above.
 

True/False
Indicate whether the statement is true or false.
 

 5. 

A magnetic pickup will attract any kind of metal.
 

 6. 

Proper filing speed is about one stroke per second.
 

 7. 

If the head of a chisel or punch becomes “mushroomed,” the tool must be discarded.
 

 8. 

“Dead blow hammer” is another name for the rubber mallet.
 

 9. 

An adjustable wrench should be used only when other types of wrenches will not fit.
 

 10. 

The 6-point box end wrench should be used when a bolt head or nut is extremely tight.
 

Matching
 
 
Match the following terms and identifying phrases.
a.
rubber mallet
d.
brass hammer
b.
rawhide hammer
e.
sledge hammer
c.
ball peen hammer
f.
dead blow hammer
 

 11. 

Has soft, light head for delicate blows.
 

 12. 

Has one flat face and one rounded end.
 

 13. 

Has large, heavy head for powerful blows.
 

 14. 

Has lead shot inside to prevent rebound.
 

 15. 

Has soft, heavy head to prevent parts damage.
 

 16. 

Has head that will rebound from solid metal parts.
 

Completion
Complete each statement.
 

 17. 

The ______________________________ and the Reed and Prince screwdrivers have similar tip shapes.
 

 

 18. 

A universal joint is a(n) ______________________________ that lets a socket wrench reach around obstructions.
 

 

 19. 

When grinding a chisel or punch, ______________________________ protection must be worn.
 

 

 20. 

According to an old saying, “if you do the job right, you will spend most of your time ______________________________ parts.”
 

 

 21. 

To prevent undue wear, apply pressure to a file only on the ______________________________ stroke.
 

 

 22. 

To prevent damaging a precision part, vise ______________________________ should be used.
 

 



 
         Start Over